Job completed for Ceiling and Closet Mold Remediation in Anderson, SC

Completion date: December 16, 2022

Location: Anderson, SC

Why did the customer contact us?

A homeowner in Anderson, SC found mold growing in an upstairs bedroom closet and spreading onto the ceiling and into the hallway nearby, which they traced back to water problems the house had experienced in the past. They wanted the affected materials removed rather than painted over, and the air in the upstairs living space cleaned up. They called us to carry out the remediation.

Solutions provided:

The assessment in Anderson covered the upstairs bedroom, the closet where growth was heaviest, the hallway outside it and the rooms adjoining them. We looked for visible growth, took moisture readings on the surrounding materials, and followed conditions back toward the attic access in the hallway ceiling, where earlier water damage had left the material compromised. Mapping the full extent first is what keeps a remediation from having to be repeated six months later.

Work zones were sealed off with plastic sheeting before any demolition began, and air scrubbers held those zones under negative pressure so spores disturbed during cutting stayed inside the containment. The layout was planned around the household's daily movement, keeping a safe route through the upstairs while the affected rooms stayed isolated. Crew worked in respirators, gloves and protective clothing throughout the removal.

Porous materials showing growth were cut out rather than cleaned in place. Mold roots into paper-faced drywall, insulation and similar materials, so wiping the surface leaves the colony intact underneath. Affected drywall was removed from the right side and back wall of the closet and from the ceiling sections where growth had spread, using a cutting tool worked slowly along marked lines to hold down airborne dust. Insulation behind the removed material came out with it, and everything was bagged inside the containment before it left the work area.

The hallway around the attic access needed the same treatment. Ceiling material there had been weakened by the earlier water intrusion, and the opening itself is a direct path between conditioned living space and an attic that runs warmer and far more humid through most of the year. Compromised material around the hatch was removed and the surrounding structure cleaned, so the repaired area would not become the starting point for the next round of growth.

With the material out, the remaining framing and surfaces inside each containment were HEPA vacuumed, wiped down and treated with an antimicrobial. Air scrubbers kept running through this stage and after it, cycling the air in the sealed zones so spores stirred up by cleaning were captured rather than left to resettle. Drying equipment handled any moisture still held in the exposed structure.

Before rebuilding, the work was verified: a visual inspection of the cleaned cavities, moisture readings confirming the structure had returned to normal levels, and a check that nothing had been found beyond the original boundaries. Only then did the containment come down. Reconstruction restored the closet, ceiling and hallway finishes in the Anderson home so the upstairs read as finished space again.

Photos & Videos:

Technician in a respirator cutting out mold-affected ceiling material inside containment in Anderson, SC
Large View Icon
Technician in a respirator cutting out mold-affected ceiling material inside containment in Anderson, SC