Water and Fire Damage Restoration & Mold Remediation in State Park

This Dentsville, SC homeowner had been fighting the same mold for a while — microbial growth kept reappearing around the windows in several rooms, including bedrooms, the kitchen, and bathrooms, no matter how many times the surfaces were wiped down. That pattern almost always points to a hidden moisture source rather than a simple surface-cleaning problem, so our team started with a careful inspection instead of jumping straight to cleanup.

We assessed the affected areas — the master bedroom, the upstairs playroom, and the exterior window frames — to find where moisture was getting in and feeding the growth. To be sure we treated the problem correctly, we collected samples and sent them for laboratory testing to identify the type of mold and confirm how far the contamination had spread. Guessing at mold is how it comes back; testing tells us exactly what we are dealing with.

With the lab results in hand, we carried out targeted mold remediation: safely removing the visible microbial growth, cleaning and disinfecting the affected surfaces, and running air filtration to capture airborne spores and improve the indoor air quality while we worked. Because the root cause traced back to windows that were not sealing properly, we also walked the homeowner through repairing or replacing those seals — the step that actually keeps the mold from coming back.

The result: the active mold was removed, the affected rooms were cleaned and disinfected, the air was filtered, and the homeowner was left with a clear, testing-backed plan to keep moisture out going forward.

When our team was called out to this Arcadia Lakes, SC home, the water damage traced back to an opening drilled for electrical equipment — the kind of small breach that can let moisture work its way into the crawl space and up into the structure long before anyone notices a problem. Our first step was a complete moisture assessment of the crawl space, the exterior wall, and the main building so we understood exactly how far the water had migrated and which materials were affected.

Because the intrusion was tied to the electrical work, we coordinated directly with the customer’s contractor before starting, making sure any necessary repairs were sequenced correctly so we weren’t drying an area that would simply be reopened. Once we were cleared to proceed, we set up a controlled drying process in the crawl space, positioning air movers and a dehumidifier to draw moisture out of the framing and subfloor and bring the space back to a safe, stable moisture level.

Throughout the job we tracked moisture readings to confirm the structure was genuinely drying rather than just feeling dry at the surface — the spots that stay damp underneath are exactly where rot and mold tend to begin. We cleaned and treated the affected areas to guard against microbial growth and to protect the wood and insulation going forward.

The result: the crawl space and surrounding areas were dried, cleaned, and stabilized, the structural integrity of the home was protected, and the homeowner left with a clear understanding of the repair that caused the issue so it would not happen again.